Hi there,
Is it possible to schedule consecutive timelapse sessions with different pan/tilt settings and immediately one after another without interruption (using the Galileo)?
I noticed in the timelapse session settings, you can specify to start immediately, or X seconds after tap, or on a specified date and time. I tried to select a date and time, which triggers the countdown "after tap" but that's the problem. You have to "frame and start" the timelapse session and tap start for the schedule settings go into effect, and there's no way to save that scheduled session or back out of that session to set up another scheduled session.
If this isn't possible, please add this as a feature request.
Please expand on the session settings to allow saving a scheduled timelapse session or for a certain timelapse session to start X seconds or immediately after "project 1, 2 or 3, etc".
This would be extremely useful and time saving and would allow you to capture a timelapse session that pans horizontally, then capture another session right after that in the same spot with no pan/tilt settings, and then another session with only tilt settings but in a different direction, or something similar to this. It would really open up the possibilities of the Galileo and the app itself.
Thanks
How to schedule consecutive timelapses?
-
- Posts: 6
- Joined: Sun Mar 23, 2014 7:55 pm
- Contact:
-
- Site Admin
- Posts: 605
- Joined: Thu May 19, 2005 10:15 pm
- Contact:
Re: How to schedule consecutive timelapses?
Hi, I will add this to the list of feature requests.
Thanks for the suggestions!
Thanks for the suggestions!
-
- Posts: 20
- Joined: Sat May 18, 2013 12:22 pm
- Contact:
Re: How to schedule consecutive timelapses?
Similarly, I've long wanted a "que" of scheduled timelapse settings to run in consecetive order. And/or a "repeat" setting.
Que Example
Session 1: Start on 2014/05/14 at 06:00
End on 2014/05/14 at 18:00
Session 2: Start on 2014/05/15 at 06:00
End on 2014/05/15 at 18:00
Session 3: Start on 2014/05/16 at 06:00
End on 2014/05/16 at 18:00
Repeat Example
Start on 2014/05/14 from at 06:00 to 18:00
Repeat until 2014/05/16
Que Example
Session 1: Start on 2014/05/14 at 06:00
End on 2014/05/14 at 18:00
Session 2: Start on 2014/05/15 at 06:00
End on 2014/05/15 at 18:00
Session 3: Start on 2014/05/16 at 06:00
End on 2014/05/16 at 18:00
Repeat Example
Start on 2014/05/14 from at 06:00 to 18:00
Repeat until 2014/05/16
-
- Posts: 1
- Joined: Thu Aug 21, 2014 12:19 am
- Contact:
Re: How to schedule consecutive timelapses?
Both great suggestions. I would appreciate que and repeat functionality also.